2025 Schulte Rotary Cutters Mowers GX-150

Information

2025 Schulte Rotary Cutters Mowers GX-150

Features may include:

  • Our general duty 15 foot flex wing rotary mower.
  • A single domed 10ga continuously welded deck makes the cutter extremely easy to clean, prevents water pooling, rusting and helps shed debris
  • An 80° CV shaft allows for smooth power transmission during tight turns. The “Best in Class” drive system features a category 6 CV for 540rpm and the 1000 rpm is a category 5. The drive line on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance
  • Equipped with Schulte Super Suction Blades with 6.5 ” blade overlap for maximum grass lift and cut
  • A four-gearbox drive line with independent slip clutches
  • Deck protection rings are standard and protect the cutter deck from rising blades
  • Deep 13 5/8” deck combined with high blade tip speeds, provides a faster cut rate than competitors.
  • High flex wing working range of 25° down to 90° up
  • Solid laminated tires 20” or 26” or forklift tires available
  • 4, 6 or 8 tire options
  • Heavy duty 3/4” thick blade disc with 4” blades and pentagon blade bolts
  • Pro Level hitch
  • Levelling rod
  • 540 or 1000 RPM Drive
  • Single chains front and rear
  • Gearbox sight glass
  • Heavy duty cast hinge line with wiper seals
  • Deck protection rings are standard

Photos

Highlights

  • Pendleton, Oregon
  • 2025
  • Schulte
  • Rotary Cutters Mowers GX-150
  • Available
  • Cutting: 1.75”-16.75” (45 mm-425 mm)

Specifications

  • 2025
  • Schulte
  • Rotary Cutters Mowers
  • GX-150
  • Finish Mower
  • Tractor: 50 hp (37 kw)
  • Divider Rating: 260 hp (194 kw) | Center & Wing Rating: 210 hp (155 kw)
  • Wing: Cat 5
  • 540 CV: Cat 6 | 1000 CV: Cat 5
  • Blade Tip Speed - Center 540 rpm: 16,286 ft/min (4964 m/min) / Wing 540 rpm: 15,459 ft/min (4711 m/min) / Center 1000 rpm: 16,390 ft/min (4996 m/min) / Wing 1000 rpm: 15,708 ft/min (4788 m/min)
  • .135” (10ga or 3.4 mm)
  • Cutting Capacity: 3.5” (89 mm) | Blade Overlap: 6.5” (165 mm) | Side Skirt Thickness: 1/4” (6.4 mm) | Wing Working Range: 25° down to 90° up | Wing Floating Range: 25° down to 30° up
  • 15’ (4.57 m)
  • 15.8’ (4.83 m)
  • 16.8’ (5.13 m)
  • Cutting: 1.75”-16.75” (45 mm-425 mm)
  • 93” (2.36 m)
  • 84” (2.13 m)
  • Side Skirt: 13.6” (346 mm)
  • 5,050 lbs (2291 kg) | Hitch: 1,520 lbs (689 kg)