2025 Schulte Rotary Cutters Mowers GX-130

Information

2025 Schulte Rotary Cutters Mowers GX-130

Features may include:

  • A single domed 10ga continuously welded deck makes the cutter extremely easy to clean, prevents water pooling, rusting and helps shed debris
  • An 80° CV shaft allows for smooth power transmission during tight turns. The “Best in Class” drive system features a category 6 CV for 540rpm. The drive line on the cutter itself employs self-adjusting friction clutches to protect your investment and always operate at peak performance
  • Equipped with Schulte Super Suction Blades with 6.5 ” blade overlap for maximum grass lift and cut
  • A four gearbox drive line with independent slip clutches
  • Deck protection rings are standard and protect the cutter deck from rising blades
  • Deep 13 5/8” deck combined with high blade tip speeds, provides a faster cut rate than competitors
  • High flex wing working range of 25° down to 90° up

Photos

Highlights

  • Pendleton, Oregon
  • 2025
  • Schulte
  • Rotary Cutters Mowers GX-130
  • Available
  • Cutting: 1.75”-16.75” (45 mm-425 mm)

Specifications

  • 2025
  • Schulte
  • Rotary Cutters Mowers
  • GX-130
  • Finish Mower
  • Tractor: 4 5hp (36 kw)
  • Divider Rating: 250 hp (186 kw) | Center & Wing Rating: 130 hp (97 kw)
  • Wing: Cat 5
  • 540 CV: Cat 6
  • Blade Tip Speed 540 rpm: Center - 16,286 ft/min (4964 m/min) / Wing - 16031 ft/min (4886 m/min)
  • .135” (10ga or 3.4 mm)
  • Cutting Capacity: 2.5” (89 mm) | Blade Overlap: 6.5” (165 mm) | Side Skirt Thickness: 1/4” (6.4 mm) | Wing Working Range: 25° down to 90° up | Wing Floating Range: 25° down to 30° up
  • 13’ (3.96 m)
  • 13.8’ (4.22 m)
  • 16.8’ (5.13 m)
  • Cutting: 1.75”-16.75” (45 mm-425 mm)
  • 93” (2.36 m)
  • 72” (1.83 m)
  • Side Skirt: 13.6” (346 mm)
  • 4725 lbs (2143 kg) (Depends on Config.) | Hitch: 1420 lbs (644 kg)