2025 Schulte Rotary Cutters Mowers FX-1200

Current Schulte Rotary Cutters Mowers

Swipe to View More

Features may include:

A single domed 7 ga continuously welded deck makes the cutter extremely easy to clean, prevents water pooling and rusting and helps shed debris.

A four gearbox drive line with independent slip clutches. The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes. The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260hp. The centre and wing boxes have 1 3/4 ” 20 spine input shafts,2 3/8 ” down shafts and are rated at 210hp.

An 80 degree CV shaft allows for smooth power transmission during tight turns. The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5. The driveline on the rotary cutter itself employs self adjusting friction clutches to protect your investment and always operate at peak performance. All clutches are located under the main shield for ease of service.

Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.

Minimum Engine Power Tractor: 45 HP (34 kW)

Engine Power Recommended tractor: 80 HP (60 kW)

PTO Power, Rated Engine Speed 540 or 1000 rpm

Gearbox Divider Rating: 260 HP (194 kw) | Center & Wing Rating: 210 HP (142 kw)

Drive System Size, Main: Cat.5CV (1000rpm), Cat.6 CV (540 rpm) | Size, Centre and Wings: Category 5

Operating Speed Blade Tip Speed: 540 rpm / Center: 15980 ft/min (4871 m/min) / Wing: 15708 ft/min (4788 m/min)

Deck Thickness 7GA (3/16",4.6 mm)

Cutting Width 126” (3.20 m)

Overall Width 137” (3.48 m)

Overall Length 202” (5.13 m)

Transport Width 93” (2.36 m) (Singles on wings) 97.5" (2.47 m) (Duals on wings)

Transport Height 84"(2.13 m)

Height Cutting: 1.75"to 16.75" (44.5 mm to 425 mm)

Ground Clearance 14.75"(42.5 mm)

Weight 5,600 lbs (2540 kg) (Depends on configuration) | Hitch: 1602 lbs (727 kg) (Depends on configuration)

Share